[STAR+CCM+ Training] How to set up wind driven rain simulation for BCA Greenmark

Siemens Authorized Channel Partner, BroadTech Engineering, will be running a 1-day Simcenter Star-CCM+ CFD Modeling and Simulation hands-on training session this coming 7th November 2019 at Siemens Center, Singapore.

At the end of this introductory training session, you’ll be equipped with the knowledge and skills to use CFD simulation and design techniques that allow you to create better-performing building design for energy efficiency performance and savings.

Read on to find out more and book your space.

What will I learn?

The workshop is split into 8 easy-to-digest modules, each of which is backed up with a range of practical examples that cover the full spectrum of industrial CFD use

Morning

1- Introduction

2- Basic Equations

3- Boundary Conditions

4- Meshes for CFD

Afternoon

5- Turbulence

6- Post-Processing

7- Quality of Results

8- Hardware for CFD

About this free workshop

Simcenter STAR-CCM+ CFD Analysis tool, with the latest porcupine date solver update, will be demonstrated in this free workshop. With the new professional feature, engineers, planners, and architects alike can easily perform the process of simulating the effects of wind-driven rain. This tool will help to improve the accuracy of WDR simulation, aggregate data, and evaluate the WDR effects base on the historical average wind data.

This workshop will dive into a multiphysics simulation on our CFD solver, looking at key setup parameters, and how to speed the simulations up to obtain fast results.

A professional simulation project will be provided to follow along during the webinar!

No prior knowledge or software is required to join this webinar.

About Simcenter STAR-CCM+

To accurately predict the real-world performance of your product you need simulation tools that capture all of the physics that will influence its performance during its operational life, including those that cross the boundaries of traditional engineering disciplines. To improve your product you need to be able to predict how performance changes in response to multiple parametric design changes.

Simcenter STAR-CCM+ is a complete multiphysics CFD Simulation solution for the simulation of products and designs operating under real-world conditions. Uniquely, Simcenter STAR-CCM+ brings automated design exploration and optimization to the simulation toolkit of every engineer, allowing you to efficiently explore the entire design space instead of focusing on single-point design scenarios.

The additional insight gained by using Simcenter STAR-CCM+ to guide your design process ultimately leads to more innovative products that exceed customer expectations.

Sponsor/exhibitor contact

Daniel Tan
[javascript protected email address]