Fraunhofer CSE installs first ‘Plug and Play’ PV system

The R&D laboratory says once the residential rooftop PV system is commercially available, homeowners will be able to purchase and install the system as easily as installing a washer and dryer.

The Fraunhofer Center for Sustainable Energy Systems (CSE) has completed the first public installation and interconnection of its new residential rooftop Plug and Play PV System.

Funded by the US Department of Energy SunShot Initative, the Plug and Play System is described by Fraunhofer CSE as “a holistic approach to residential PV that will dramatically help reduce the total installed costs of solar electricity by 2020, from $4.00 per Watt installed to $1.50/Watt.”

The Fraunhofer CSE applied research and development laboratory said it sought to develop “a system design that addresses all aspects of the solar purchasing and installation process” by incorporating “innovative technologies with a PV system architecture that simplifies interconnection, permitting and inspection.”

“What is particularly unique about this project is that it doesn’t just stop at technology development but is a comprehensive approach, including integration with the utilities and jurisdictions,” said Christian Hoepfner, center director of Fraunhofer CSE and principal investigator on the Plug and Play PV project. 

“Fraunhofer CSE and its partners are particularly well-positioned to tackle this challenge because of our integrated expertise across solar PV, building, and grid technologies. As an applied R&D organization, our focus is on getting technologies — especially those that will impact society and drive clean energy adoption — into the hands of consumers.”

According to Fraunhofer CSE, the Plug and Play system is centered on ease of use and installation to encourage people to adopt solar. “Once commercially available, homeowners will be able to go to their local building supply stores, purchase the PV systems, and install them in less than 10 hours — as easily as installing a washer/dryer combination.”

Fraunhofer CSE has worked closely with a number of commercialization partners and other stakeholders, including the City of Boston, local Massachusetts jurisdictions (including the towns of Dartmouth and Falmouth), and New England utilities like Northeast Utilities, National Grid and Green Mountain Power.

Penni Conner, Senior VP and Chief Customer Officer at Northeast Utilities, said the program was “incredibly important because it not only addresses installation barriers, but also simplifies the interconnection process. These systems make solar adoption a less complicated and time-consuming process for our customers and easier for us to bring new solar onto our systems. Our customers are going to have easier access to solar, helping us support a more sustainable energy future.”

As part of its recent Plug and Play Demo Day, Fraunhofer CSE demonstrated the full-scale installation and commissioning of a PV system in one hour. The project’s next focus will be on the demonstration of a commercial-ready system in 2015.

Fraunhofer CSE, a subsidiary of Fraunhofer USA, is affiliated with the German Fraunhofer Gesellschaft research and development institute.

Did you find this article useful? Join the EB Circle!

Your support helps keep our journalism independent and our content free for everyone to read. Join our community here.

Most popular

Featured Events

Publish your event
leaf background pattern

Transforming Innovation for Sustainability Join the Ecosystem →